The seamless sliding contact line is a new type of transmission sliding contact line. Its shell is designed with a flat plate and the material is PVC-SG-5. It has strong flame retardancy and high-pressure resistance.
It is embedded with multiple copper transmission conductors and spans. Large seamless processing, low operating failure rate, its disadvantage is that it is only suitable for low-power and stable operation of mechanical equipment.
Features:
1. The conductor is electrolytic copper, with good conductivity, pure quality and bright color;
2. Copper and plastic are dissolved and contacted, and there is no bad contact due to vibration;
3. No joints, low-pressure drop;
4. There are few parts and components, and the electric rail is stuck into the device, which is convenient for installation;
5. The arm length of the collector frame is equipped with an independent tension spring, which is flexible and flexible;
6. Adopt jointless installation, simple and time-saving, small space;
7. Made of special materials, stable operation, fast speed and low noise;
8. The installation bending radius is small, the minimum bending radius is 750mm;
9. The insulator is PVC-SG-5, impact resistance, UV resistance, special formula, good physical properties;
|
Model |
Conductor Cross-sectional |
Rated Xurrent |
DC Resistance |
Rated Current Impedance |
|
TQ-S-3-6 |
6 |
30 |
2.13 |
0.56 |
|
TQ-S-3-10 |
10 |
50 |
1.91 |
0.72 |
|
TQ-S-3-16 |
16 |
80 |
1.16 |
0.82 |
|
TQ-S-3-25 |
25 |
120 |
0.725 |
1.07 |
|
TQ-S-4-6 |
6 |
30 |
2.13 |
0.77 |
|
TQ-S-4-10 |
10 |
50 |
1.91 |
0.88 |
|
TQ-S-4-16 |
16 |
80 |
1.16 |
1.02 |
|
TQ-S-4-25 |
25 |
120 |
0.725 |
1.38 |
|
TQ-S-4-35 |
35 |
140 |
0.526 |
1.73 |
|
TQ-S-6-10 |
10 |
50 |
1.91 |
1.56 |
|
TQ-S-6-16 |
16 |
80 |
1.16 |
1.61 |
|
TQ-S-6-25 |
25 |
120 |
0.725 |
2.43 |
+86-318-5111881
