BQ grip puller is used to tighten wires in overhead line laying. When using, first loosen the steel wire rope or galvanized iron wire on the tensioner, and fix it on the crossarm, clamp the wire with the clamp, and then pull the special wrench. Due to the anti-reverse effect of the pawl, the steel wire rope or galvanized iron wire is gradually wound on the ratchet drum to tighten the wire. Fix the tightened wire on the insulator. Then first loosen the pawl to loosen the steel wire rope, then loosen the clamp, and then wind the steel wire rope on the roller of the ratchet wheel.
Tightener application areas: machinery equipment for infrastructure construction projects such as construction, highways, bridges, metallurgy, mines, slope tunnels, shaft protection and protection.
Features
1. The operation is simple, only need to use a hook to pull the two ends tightly, and then pull the handle.
2. Small size and light weight.
3. Can rotate 180 °.
4. The anti-skid design of the handle will not cause potential danger due to sweating in the hand.
5. High-quality anti-skid hooks to prevent falling off during work.
|
model |
Rated load（N） |
Minimum breaking load（N） |
inner packing |
outer packing |
Measurement |
weight（KG） |
G.W（KG） |
|
BQ10D |
5000 |
10000 |
1pcs/box |
10box/carton |
53.5×37×20.5 |
19 |
21 |
|
BQ15Q |
8000 |
16000 |
1pcs/box |
10box/carton |
54×39×21 |
21 |
23 |
|
BQ20 |
10000 |
20000 |
1pcs/box |
10box/carton |
59×41×24 |
23 |
25 |
|
BQ20B |
10000 |
20000 |
1pcs/box |
10box/carton |
59×41×24 |
28 |
30 |
+86-318-5111881
